The Outfitter Hunting and Deer Processing

Enter a Customer,Leave a Friend

We are a Full Line Bowtech, Hoyt, Ross, Bear, and Parker dealer

If you are in the market for a new bow this year, come check out our full selection of bows. We understand that buying a new bow is a major purchase, that is why we will take the time to make sure you are HAPPY with your purchase. We have a indoor tuning range as well as the ONLY 3-D Hunting range. Our outdoor range is open year around and there is no charge to shoot on the range. Check out the links to the line of bows we carry. You can click on the logo and you will be redirected to the company webpage.

 

New Products:

Ten-hut! Look sharp and pay attention! Let's keep this short and sweet. Generals lead. Everyone else follows.

What's it take to be a General? Power! Stability! And an ultra-smooth CenterTrac Binary Cam System coupled

with Center Pivot limb technology and an extremely forgiving 8 1/4 inch brace height.

The General is engineered to distribute limb pressure evenly, providing maximum performance with perfect balance.

Add to that our proprietary CenterTrac Binary Cam for a draw that's more forgiving than your pastor's grandmother.

Finally, throw in a combination Roller Guard/ShortStop string suppressor, and you have a bow that leads the way in

silence and shootability. Are we clear here? At ease, soldier!

General Specs
Brace Height: 8 1/4"
Draw Weight: 50-60-70
Draw Length: 26"-30"
Axle to Axle: 31 3/16"
Speed MOD IBO: 307-315 fps
Kinetic Energy: 77.13 fpe
IBO Smooth MOD: 300-308 fps
Adjustable Let-off: 65%-80%

          In honor of the soldiers for whom this bow is named, BowTech will donate a portion of every

Airborne purchase to the Tragedy Assistance Program for Survivors. For more information, visit www.TAPS.org.

DEATH BY AIR - The men and women who courageously serve in our military exemplify leadership,

valor and teamwork, all values on which BowTech is built. But paratroopers in the 82nd Airborne Division

are a breed apart: warriors who surf the clouds into enemy territory on missions impossible.

         The 82nd Airborne bow was designed for this adrenaline addict mentality, boasting our new Zero-Tolerance

limb pockets and the third generation Binary Cams to produce speeds worthy of an elite trooper.

So, if you have a need for speed, your search stops here.

82nd's Specs
Brace Height: 6 1/8"
Draw Weight: 60-70
Draw Length: 26.5"-30.5"
Axle to Axle: 36 1/2"
Speed MOD IBO: 342-350 fps
Kinetic Energy: 95.23 fpe
IBO Smooth MOD: 330-338 fps
Adjustable Let-off: 65%-80%

          SCREAMING EAGLE - You could say the 101st Airborne Division possesses some might: like three

ground brigades, division artillery, several separate commands, two aviation brigades, a corps

support group, and three battalions of the Apache attack helicopters - all capable of inserting a

combined arms task force deep into enemy terrain in a single lift. So you can appreciate the power

of a bow by the same name.

          Yet, given its awesome affinity for raw strength, the generous brace height of the 101st Airborne bow is

amazingly forgiving and shootable, while still providing fantastic speed and performance.

          Dedicated to the 101st Airborne "Screaming Eagles," this bow is for sportsmen who want speeds that

approach the sound barrier.

101st Specs
Brace Height: 7 1/4"
Draw Weight: 60-70
Draw Length: 27.5"-31.5"
Axle to Axle: 36 1/4"
Speed MOD IBO: 332-340 fps
Kinetic Energy: 89.86 fpe
IBO Smooth MOD: 320-328 fps
Adjustable Let-off: 65%-80%

         The Tomkat is BowTech's only package bow...ready to go, right out of the box and it's an animal when

it comes time to perform. This bow is both maneuverable and lightweight, while delivering quantum

power on release. Not to mention, the TomKat keeps its claws sharp on the Binary Cam system

that sports mod options that provide cheetah speed or stealthful shootability.

         Don't let the low cost fool you. This is a high quality, versatile bow, designed for the novice or seasoned

veteran looking for unequaled value.

Tomkat Specs
Brace Height: 8.5"
Draw Weight: 50-60-70
Draw Length: 27"-31"
Axle to Axle: 31 3/4"
Speed MOD IBO: 307-315 fps
Kinetic Energy: 77.13 fpe
IBO Smooth MOD: 299-307 fps
Adjustable Let-off: 65%-80%

 

 

New Products:

The first time you hold the all-new Vectrix™, you’ll feel the difference. Shoot it, and you’ll be left speechless. The 2nd generation, parallel limb Hoyt Vectrix, is a complete redesign of the already popular Trykon. Our relentless engineering team spent thousands of hours researching, testing and improving every facet of the design and function of the bow. The new, lighter TEC riser is equipped with our innovative StealthShot™ String Suppression System and two RizerShox. These systems synergistically combine to completely silence and deaden the bow. The firepower behind the Vectrix is generated from the new, highly efficient and super smooth Vector Cam & 1/2. The effortless and steady draw cycle is incredibly smooth, but the hard-hitting speed that it creates leaves no doubt that this is a high-performance bow. For a shot like you’ve never experienced, shoot the Vectrix today.

Speed has never been so smooth. Introducing the all-new, screamin’ fast yet silky smooth Vulcan™. Powered by the new Vector Cam & 1/2, the Vulcan fires arrows at speeds over 325 fps. Unlike other speed bows, the Vulcan remains exceptionally smooth, vibration free and easy to shoot thanks to Hoyt’s new StealthShot™ String Suppression System, Dual RizerShox and TEC riser design. If you’re looking for a bow that hits fast and hard, yet remains smooth and shock-free in your hand, the Vulcan has been designed for you.

 

 

 

 The Ross Bows comes in three different models. Cardiac, CR331, CR334, and CR337.

Features:

  • 100% Machined Riser out of a solid block of 6061 T6 Aluminum for the most consistent, percise and accurate risers on the market.
  • Precision Matched Cam to Idler that provides even tiller and smother draw.
  • Sealed bearings in both the Cam and Idler Wheel.
  • Teflon Cable Slide quiet under any hunting conditions.
  • Proprietary Center Shot Technology.
  • Large sight window for superb field of view.  
  • Broadhead guard with extra wide shelf.
  • Stainless Steel Stabilzier Bushings.
  • Modular draw length adjustments in 1/2 inch increments. 
  • Precision Machined Locking Pivoting Limb Pockets. 
  • New FLATLINE Anti-Vibration System.
  • New TUFF-TECH Color Fusion Camo.
  • Winners Choice Custom Strings.

 

 

It's from Bear.

It's from Primos.

         "No single characteristic defines this bow's performance. The TRUTH® 2 is a total system advancement," 

say the engineers at Bear®. "You won't know how good this bow feels for yourself until you get your

hands on one," says Will Primos of Primos Hunting Calls. We set out to change a few things. After

months of focus and collaboration, we changed everything. The result: The TRUTH 2 raises the bar

again for performance that is well above price

Truth 2 Specs:

Length (Axle To Axle)  33 in.

Draw Length Range  24in. to 30in.

Speed  314-318 fps

Brace Height  7in.

 

          It's a DONE DEAL for speed, power and feel. Outside of The TRUTH® 2, this bow benefits the most

from the collaboration of the Bear® and Primos® engineering and hunting teams. It's feature-packed

and is sure to become known as one of the world's most intriguing archery weapons. Shoot one to

truly understand how smooth it is. Developed in the finest tradition of Bear Archery — performance

that far exceeds price. It's about the hunt...your hunt.

          It's GAME OVER when you are looking for one of the most forgiving bows. And the game is over

when you compare this bow — feature for feature — to any comparably priced bow on the

market. This bow features many enhancements developed for The TRUTH® 2 and DONE DEAL.

The GAME OVER takes "performance above price" to a new level.

 

Why Buy a Parker Bow?


Parker bows are the highest quality bows manufactured today.

"Here are some of the reasons why:"

1. View a Parker riser up close. The machining is perfection. Notice the beveled edges, the rounded corners and the perfect fit to the limb pockets. Parker machined risers do not bend or break.

2. Examine the perfection of our Parker limbs which are CNC machined from the finest Gordon glass available. Use a micrometer to measure the precision consistency of each limb. Notice the beveled edges which prevent splintering. Compare the fit of the limb to the cam. There are no "extra"
washers needed on a Parker bow.

3. Remove the limb and inspect the Delrin limb rocker - no squeaks or breakage ever!

4. Look at the Parker cam and the press-fit Delrin Bushings. Once again, Parker doesn't cover up poor workmanship with "extra" washers.

5. Take note of the stainless steel stabilizer bushings. This is "top of the line" which results in no broken or pulled out bushing.

6. Place your hand on the Synprene grip. This is not a rubber grip. Synprene is a special material with a durometer reading that best matches the human hand. Synprene is tacky, comfortable and warm while hunting.

7. Parker offers a Lifetime Warranty to the original owner of a Parker bow. This is your guarantee that you are buying the best.

8. Parker's customer service is unparalleled in the archery industry. Nearly every bow sent to Parker is returned within 24 hours. Other companies talk about their service. Parker performs day in and day out!

9. At Parker, you can speak to a real bow technician. We don't believe in aggravating phone systems to fight your way through to a human. We want to talk to you and we want you to be pleased with your experience.

10. Our motto at Parker? The customer is always first, without the customer we don't have a company